工業環境中，為了實現智能制造和連鑄工藝，以前由人來觀察液位，現在用激光鋁槽液位計來檢測，節省人力高效

LDM-3R-V激光鋁位計，液位變送器

It distinguishes itself through high precision as well as high independence from the surface of the measuring object. The red, visible laser beam allows for easy alignment. The sister model LDM-3R-Vhas been further developed for fast distance measurements on white surfaces.

• Distance measurement and determination of position
• Diameter measurement of rolls / coils 
• Fill level measurement 
• Position control 
• Monitoring of safety-relevant parts 
• Monitoring of lifting plants / lifting height measurement and positioning of elevators
• Monitoring and positioning of cranes and conveyor systems
• Millimeter precise measurement on various surfaces 
• Long range reflector-less distance measurement 
• With additional reflectors on the target object measurements over 100 m 
• Operation in extreme ambient temperatures with high precision and range
• High supply voltage range between 10 V and 30 V DC with low power consumption 
• Safe operation through laser class 2 
• Easy adjustment through visible laser beam 
• One connection cable for supply voltage, serial data interface, switching and analog output 
• Customized parameterization via PC 
• Display of measured values in meters, feet, inches and others due to free scaling
• Robust, compact housing, easy to install, protection standard IP 65

• Measuring range1	0.2 m ... 30 m on almost all natural surfaces, over 100 m achievable depending on the degree of reflection of surfaces
  Measuring uncertainty2	±2 mm under defined measuring conditions3 ±3 mm (+15 °C ... +30 °C) ±5 mm (-10 °C ... +50 °C)
  Resolution	0.1 mm, freely scalable
  Reproducibility4	0.5 mm
  Measuring time	0.24 s ... 6 s adjustable or automatically in mode DT 0.1 s in mode DW on white surface 20 ms in mode DX on white surface (only LDM42A)
  Laser divergence5	0.6 mrad
  Laser class	Laser class 2 acc. to DIN EN 60825-1:2001-11 (650 nm, red)
  Operating temperature	-10 °C ... +50 °C
  Storage temperature	-40 °C ... +70 °C
  Supply voltage	10 V ... 30 V direct currents
  Power consumption	Ca. 1.5 W
  Serial interface6	RS232 or optional RS422, max. Baud rate 38400, ASCII, setting of measuring functions, scaling, measuring time via commands, display of measured values, internal temperature and error code
  Switching output	Programmable switching threshold and hysteresis, "high side" switch, maximum load 0.5 A
  Analog output	Programmable distance range limits, 4 mA to 20 mA, adjustable reaction on error (3 mA, 21 mA or last valid measured value)
  Housing material	Aluminum anodized
  Size (LxBxH)	187 mm x 96 mm x 50 mm
  Weight	850 g
  Protection class	IP 65
  Shock resistance	10 g / 6 ms (DIN ISO 9022-3-31-01-1)
  MTBF	30,000 hours at 25 °C
  Mounting	4 drill holes for M6 screws, 100 mm x 85 mm

  
  

  1	Dependent on target reflectance, influence of extraneous light and atmospheric conditions
  2	Statistical spread of 95 %
  3	Measurement on planar, vertical white surface at standstill or in continuous movement, + 15 °C to +30 °C
  4	Dependent on target reflectance, influence of extraneous light and atmospheric conditions
  5	At a distance of 10 m the beam diameter is 6 mm, at 100 m it is 6 cm
  6	Please specify option RS422 when placing the order